Trees provide much needed shade and can make a great addition to your yard, but they can also pose a risk if they are dead or falling on your house. Luckily, local experts are ready to help you safely remove unwanted or unsafe trees. These Logan tree services use specialized equipment to safely fell trees while protecting the surrounding flora. They can also help you design a safe and functional landscape, improving your property value.
The first step in the process of https://www.google.com/maps?cid=8768464208228278350 is assessing the situation. You must determine the size and condition of the tree, as well as its location in relation to your home or other structures. This will allow you to determine the proper direction to fell the tree, and the best route for removing it from your property. The most common method for felling a tree is to cut it from its base on the side where it will fall. This is known as a “face cut.” The second cut, which is made slightly higher than the face cut, creates a hinge that allows the tree to fall on its natural path.
You must clear the area around the tree before cutting it. This includes removing branches, small logs and downed trees that could get entangled in your chainsaw or cause injury to you or anyone else in the area. It’s also important to clear a space that is far enough away from the tree that you can move out of the way in case it falls. If you’re working on a sloped terrain, this is even more important.
Once you’ve cleared out an area around the tree, it’s time to start preparing the site for felling. Begin by examining the stump end of the tree and cutting out any rot, if necessary. Then, measure the length of the first log based on what you want it to be used for, such as firewood or cabin logs.
Next, saw through the trunk on the side of the tree that will fall to create a triangular cut. You can either use a conventional undercut or a newer style of undercut, which features angled top and bottom faces that meet each other. This allows you to control the direction of the tree’s fall for a longer period of time.
Finally, you must cut a notch on the opposite side of your triangular cut. This is important because it will prevent the bottom of the cut portion from kicking back when the tree begins to fall. The notch should be cut an inch or two higher than your saw through the tree’s face. This will ensure that the two cuts line up and form a hinge, allowing the tree to fall as planned. Then, saw through above the notch and create a slight downward angle in the top of the tree. This will also help the tree to break off naturally in its final descent to the ground.
from Tree Lopping Logan Co Blog https://ift.tt/63dPAye
No comments:
Post a Comment